JetHome docs/Controllers — English @ Weblate: PCF8563 SDA GPIO number = **5**

Zen

Translation

Russian

English

Review state

Translated

Skip

	Russian	English	Actions
	Настройте проект для работы с микроконтроллером ESP32:	Configure the project to work with the ESP32 microcontroller:
	В меню «EEPROM configuration», например, для процессорного модуля E1-CPU необходимо установить следующие параметры:	In menu "EEPROM configuration ", for example for processor module E1-CPU it is necessary to set the following parameters:
	EEPROM MODEL = 24C64	EEPROM MODEL = 24C64
	SCL GPIO = 4	SCL GPIO = 4
	SDA GPIO = 5	SDA GPIO = 5
	I2C address of EEPROM = 0x54	I2C address of EEPROM = 0x54
	Сборка и прошивка проекта:	Assembling and flashing the project:
	Выход из монитора - CTRL+]	Exit the monitor - CTRL+]
	Пример для работы I2C RTC PCF8563	Example for I2C RTC PCF8563 operation
	Данная тестовая программа, получает данные о времени по протоколу NTP и записывает их в микросхему RTC PCF8563, затем читает данные о времени из микросхемы RTC.	This test program receives time data via the NTP protocol and writes them to the RTC chip PCF8563, then reads the time data from the RTC chip.
	В меню «Example Connection Configuration» установите параметры подключения для вашей Wi-Fi сети:	Use the "Example Connection Configuration " menu to set the connection parameters for your Wi-Fi network:
	WiFi SSID = "Your SSID"	WiFi SSID = "Your SSID"
	WiFi Password = "Your password"	WiFi Password = "Your password"
	В меню «PCF8563 Configuration» установите:	Set the "PCF8563 Configuration " menu:
	PCF8563 SCL GPIO number = 4	PCF8563 SCL GPIO number = 4
	PCF8563 SDA GPIO number = 5	PCF8563 SDA GPIO number = 5
	`ESP-IDF`_ - Espressif IoT Development Framework (ESP-IDF)	`ESP-IDF`_ - Espressif IoT Development Framework (ESP-IDF)
	`ESP-IDF Programming Guide`_ - Документация к ESP-IDF	`ESP-IDF Programming Guide`_ - Documentation for ESP-IDF

Loading…

None

String added in the repository

Russian

English 31 characters editedCurrent translationState: Translated

04/29/2026

Browse all string changes

Things to check

Unchanged translation

Source and translation are identical.

Reset

Glossary

Russian	English
No related strings found in the glossary.

Browse glossary JetHome docs

String information

Flags

rst-text

Unit identifier

10770

Source string location

../../controllers/mcu/software/espidf.rst:100

String age

04/29/2026

Last updated

07/06/2026

Source string age

04/29/2026

Translation file gettext PO file

_locale/en/LC_MESSAGES/controllers.po, string 1544

Shortcut	Action
`?`	Open available keyboard shortcuts.
`Alt` + `Home`	Navigate to the first translation in the current search.
`Alt` + `End`	Navigate to the last translation in the current search.
`Alt` + `PageUp` or `Ctrl` + `↑` or `Alt` + `↑` or `Cmd` + `↑` or	Navigate to the previous translation in the current search.
`Alt` + `PageDown` or `Ctrl` + `↓` or `Alt` + `↓` or `Cmd` + `↓` or	Navigate to the next translation in the current search.
`Ctrl` + `Enter` or `Cmd` + `Enter`	Submit current form; this works the same as pressing Save and continue while editing translation.
`Ctrl` + `Shift` + `Enter` or `Cmd` + `Shift` +`Enter`	Unmark translation as Needing edit and submit it.
`Alt` + `Enter` or `Option` + `Enter`	Submit the string as a suggestion; this works the same as pressing Suggest while editing translation.
`Ctrl` + `E` or `Cmd` + `E`	Focus on translation editor.
`Ctrl` + `U` or `Cmd` + `U`	Focus on comment editor.
`Ctrl` + `M` or `Cmd` + `M`	Shows Automatic suggestions tab.
`Ctrl` + `1` to `Ctrl` + `9` or `Cmd` + `1` to `Cmd` + `9`	Copies placeable of a given number from source string.
`Ctrl` + `M` followed by `1` to `9` or `Cmd` + `M` followed by `1` to `9`	Copy the machine translation of a given number to current translation.
`Ctrl` + `I` followed by `1` to `9` or `Cmd` + `I` followed by `1` to `9`	Ignore one item in the list of failing checks.
`Ctrl` + `J` or `Cmd` + `J`	Shows the Nearby strings tab.
`Ctrl` + `S` or `Cmd` + `S`	Focus on search field.
`Ctrl` + `O` or `Cmd` + `O`	Copy the source string.
`Ctrl` + `Y` or `Cmd` + `Y`	Toggle the Needs editing checkbox.
`→`	Browse the next translation string.
`←`	Browse the previous translation string.

Translation

Things to check

Unchanged translation

Glossary

String information

Flags

Details

Unit identifier

Source string location

String age

Last updated

Source string age

Translation file gettext PO file