JetHome docs/Controllers — English @ Weblate: :ref:`hassio_addon_jethub_mqtt

Zen

Translation

Russian

English

Review state

Translated

Skip

	Russian	English	Actions
	``STAT`` - синий пользовательский светодиод.	``STAT`` - blue custom LED.
	Размеры и масса	Dimensions and weight
	Габаритные размеры: 100 x 97 x 20 мм;	Overall dimensions: 100 x 97 x 20 mm;
	Масса без блока питания: 120 г	Weight without power supply: 120 g
	Коммуникации	Communications
	Интегрированный двухдиапазонный (2,4 ГГц и 5 ГГц) модуль беспроводной связи Wi-Fi/Bluetooth Realtek RTL8822CS. Поддерживает стандарты Wi-Fi IEEE 802.11a/b/g/n/ac, 2×2 MIMO, а также Bluetooth 5.0.	Integrated dual-band (2.4 GHz and 5 GHz) wireless module Wi-Fi/Bluetooth Realtek RTL8822CS. Supports Wi-Fi IEEE 802.11a/b/g/n/ac, 2×2 MIMO, and Bluetooth 5.0 standards.
	Ethernet IEEE 802.3 10/100 Мбит/с.	Ethernet IEEE 802.3 10/100 Mbps.
	Модуль беспроводной связи Zigbee TI CC2538 + CC2592 или TI CC2652P1 с выходной мощностью до 20 дБм и поддержкой стандарта Zigbee 3.	Wireless Zigbee module TI CC2538 + CC2592 or TI CC2652P1 with up to 20 dBm output power and support for Zigbee 3 standard.
	Интерфейсы	Interfaces
	Поддержка карт MicroSD 2.x/3.x/4.x DS/HS;	Supports MicroSD 2.x/3.x/4.x DS/HS cards;
	2 x USB 2.0 high-speed;	2 x USB 2.0 high-speed;
	Serial-консоль выведена на разъем питания MicroUSB.	The Serial Console is connected to the MicroUSB power connector.
	Светодиоды	LEDs
	:ref:`linux_gpio_outputs`	:ref:`linux_gpio_outputs`
	:ref:`linux_mqtt_io`	:ref:`linux_mqtt_io`
	:ref:`hassio_addon_jethub_mqtt_io`	:ref:`hassio_addon_jethub_mqtt_io`
	На плате контроллера установлены два светодиода:	There are two LEDs on the controller board:
	Светодиод	LED
	Вывод	Output
	Linux\ [#]_	Linux\ [#]_
	gpiolib	gpiolib
	Active low	Active low
	Синий	Blue
	GPIODV_24	GPIODV_24
	596 (585)	596 (585)
	26	26
	1	1
	Зеленый	Green
	Индикация наличия питания	Power supply indication
	в скобках указаны значения для Linux Kernel версии менее 6.2	The values in brackets are for Linux Kernel, versions less than 6.2
	Беспроводной модуль (Zigbee)	Wireless module (Zigbee)

Loading…

None

String added in the repository

Russian

English 34 characters editedCurrent translationState: Translated

04/29/2026

Browse all string changes

Glossary

Russian	English
No related strings found in the glossary.

Browse glossary JetHome docs

String information

Flags

rst-text

Unit identifier

9144

Source string location

../../controllers/linux/howto/mqtt_io.rst:8 • ../../controllers/linux/includes/common/hints/gpio_inputs.rst:4 • ../../controllers/linux/includes/common/hints/gpio_outputs.rst:4

String age

04/29/2026

Last updated

04/29/2026

Source string age

04/29/2026

Translation file gettext PO file

_locale/en/LC_MESSAGES/controllers.po, string 42

Shortcut	Action
`?`	Open available keyboard shortcuts.
`Alt` + `Home`	Navigate to the first translation in the current search.
`Alt` + `End`	Navigate to the last translation in the current search.
`Alt` + `PageUp` or `Ctrl` + `↑` or `Alt` + `↑` or `Cmd` + `↑` or	Navigate to the previous translation in the current search.
`Alt` + `PageDown` or `Ctrl` + `↓` or `Alt` + `↓` or `Cmd` + `↓` or	Navigate to the next translation in the current search.
`Ctrl` + `Enter` or `Cmd` + `Enter`	Submit current form; this works the same as pressing Save and continue while editing translation.
`Ctrl` + `Shift` + `Enter` or `Cmd` + `Shift` +`Enter`	Unmark translation as Needing edit and submit it.
`Alt` + `Enter` or `Option` + `Enter`	Submit the string as a suggestion; this works the same as pressing Suggest while editing translation.
`Ctrl` + `E` or `Cmd` + `E`	Focus on translation editor.
`Ctrl` + `U` or `Cmd` + `U`	Focus on comment editor.
`Ctrl` + `M` or `Cmd` + `M`	Shows Automatic suggestions tab.
`Ctrl` + `1` to `Ctrl` + `9` or `Cmd` + `1` to `Cmd` + `9`	Copies placeable of a given number from source string.
`Ctrl` + `M` followed by `1` to `9` or `Cmd` + `M` followed by `1` to `9`	Copy the machine translation of a given number to current translation.
`Ctrl` + `I` followed by `1` to `9` or `Cmd` + `I` followed by `1` to `9`	Ignore one item in the list of failing checks.
`Ctrl` + `J` or `Cmd` + `J`	Shows the Nearby strings tab.
`Ctrl` + `S` or `Cmd` + `S`	Focus on search field.
`Ctrl` + `O` or `Cmd` + `O`	Copy the source string.
`Ctrl` + `Y` or `Cmd` + `Y`	Toggle the Needs editing checkbox.
`→`	Browse the next translation string.
`←`	Browse the previous translation string.

Translation

Glossary

String information

Flags

Details

Unit identifier

Source string location

String age

Last updated

Source string age

Translation file gettext PO file