JetHome docs/Controllers — English @ Weblate

Russian

*UART*-консоль выведена на 3-х контактный штырьевой разъем, расположенный на периферийной плате контроллера и отмеченный как *CONSOLE*. Назначение контактов разъема также нанесено на плату контроллера.

432 ../../controllers/linux/software/armbian.rst:6 • ../../controllers/linux/software/armbian.rst:44 • ../../controllers/mcu/howto/esphome/hassio.rst:23 • ../../controllers/mcu/jxd/index.rst:6 • ../../controllers/mcu/software/esphome/configs/e1/e1_cpu/jethub_e1_cpu.rst:139 • ../../controllers/mcu/software/esphome/configs/e1/e1_cpu/jethub_e1_cpu.rst:143 • ../../controllers/includes/motherboards/pd76_basic/connectors/40_pin.rst:3
	Russian План
	English Plan 4/100 · 4 Review state Translated
433 ../../controllers/includes/motherboards/pd76_basic/connectors/40_pin.rst:4
	Russian Добавить описание пинов
	English Add a description of the pins 29/230 · 23 Review state Translated
434 ../../controllers/linux/includes/platforms/j100/d1_cpu/uart_console.rst:1
	Russian UART-консоль выведена на 3-х контактный штырьевой разъем, расположенный на периферийной плате контроллера и отмеченный как CONSOLE. Назначение контактов разъема также нанесено на плату контроллера.
	English The UART console is terminated on a 3 pin connector located on the peripheral board of the controller and marked as CONSOLE. The pin assignment of the connector is also marked on the controller board. 204/2010 · 201 Review state Translated
435 ../../controllers/linux/includes/platforms/j100/d1_cpu/uart_console.rst:7
	Russian Для доступа к разъему необходимо открыть крышку контроллера
	English To access the connector, open the cover of the controller 57/590 · 59 Review state Translated
436 ../../controllers/linux/includes/platforms/j100/d1_cpu/uart_console.rst:8
	Russian Для подключения к компьютеру можно использовать любой преобразователь интерфейсов USB-UART, например, `CP2102 USB 2.0 to UART TTL <https://aliexpress.com/item/32694152202.html>`_.
	English You can use any USB-UART interface converter to connect to a computer, such as the `CP2102 USB 2.0 to UART TTL <https://aliexpress.com/item/32694152202.html>`_. 162/1810 · 181 Review state Translated
437 ../../controllers/linux/din_rail/d1.rst:186 • ../../controllers/linux/din_rail/d1p.rst:194 • ../../controllers/linux/din_rail/d1p_knx.rst:189
	Russian Варианты электропитания
	English Power options 13/230 · 23 Review state Translated
438 ../../controllers/includes/motherboards/pd76_basic/power.rst:1 • ../../controllers/includes/motherboards/pd76_r5_v1/power.rst:1 • ../../controllers/includes/motherboards/pd76_r5_v2/power_dc.rst:1
	Russian Предусмотрены следующие варианты электропитания:
	English The following power supply options are available: 49/480 · 48 Review state Translated
439 ../../controllers/includes/motherboards/pd76_basic/power.rst:3 • ../../controllers/includes/motherboards/pd76_r5_v1/power.rst:3 • ../../controllers/includes/motherboards/pd76_r5_v2/power_dc.rst:3
	Russian От внешнего стабилизированного источника постоянного тока через внешнюю клемму.
	English From an external stabilized DC source via an external terminal. 63/790 · 79 Review state Translated
440 ../../controllers/includes/motherboards/pd76_basic/power.rst:7 • ../../controllers/includes/motherboards/pd76_r5_v1/power.rst:7 • ../../controllers/includes/motherboards/pd76_r5_v2/power_dc.rst:7
	Russian Рекомендуемый (номинальный) диапазон входных напряжений от 12В до 48В
	English Recommended (rated) input voltage range 12V to 48V 52/710 · 71 Review state Translated
441 ../../controllers/includes/motherboards/pd76_basic/power.rst:8 • ../../controllers/includes/motherboards/pd76_r5_v1/power.rst:8 • ../../controllers/includes/motherboards/pd76_r5_v2/power_dc.rst:8
	Russian Максимальный диапазон входного напряжения питания составляет от 9 до 56В.
	English The maximum input supply voltage range is 9 to 56V. 53/750 · 75 Review state Translated
442 ../../controllers/includes/motherboards/pd76_basic/power.rst:9
	Russian Необходимо применять стабилизированный источник постоянного тока мощностью не менее 10Вт.
	English A stabilized DC power supply of at least 10W must be used. 60/910 · 91 Review state Translated
443 ../../controllers/includes/motherboards/pd76_basic/power.rst:12 • ../../controllers/includes/motherboards/pd76_r5_v1/power.rst:12 • ../../controllers/includes/motherboards/pd76_r5_v2/power_dc.rst:12
	Russian По технологии :ref:`passive_poe` через разъем порта Ethernet.
	English Via technology :ref:`passive_poe` via the Ethernet port connector. 68/630 · 63 Review state Translated
444 ../../controllers/includes/motherboards/pd76_basic/power.rst:16 • ../../controllers/includes/motherboards/pd76_r5_v1/power.rst:16
	Russian Рекомендуемое номинальное входное напряжение питания :ref:`passive_poe` - от 12 до 48В.
	English The recommended nominal input supply voltage :ref:`passive_poe` is 12 to 48V. 79/890 · 89 Review state Translated
445 ../../controllers/includes/motherboards/pd76_basic/power.rst:17 • ../../controllers/includes/motherboards/pd76_r5_v1/power.rst:17
	Russian Полярность подключения не имеет значения.
	English The polarity of the connection does not matter. 47/410 · 41 Review state Translated
446 ../../controllers/includes/motherboards/pd76_basic/power.rst:19
	Russian Контроллер может питать внешние маломощные устройства (датчики) с напряжением питания 5В. Выход 5В выведен на клемму контроллера. Максимальный ток, отдаваемый на внешнюю нагрузку - 0,2А.
	English The controller can power external low-power devices (sensors) with 5V supply voltage. The 5V output is connected to the terminal of the controller. The maximum current output to external load is 0.2A. 212/1980 · 198 Review state Translated
447 ../../controllers/linux/includes/platforms/j100/d1_cpu/power.rst:3
	Russian Во время прошивки контроллер может запитан от внешнего USB-порта через кабель USB type A - USB type A.
	English During flashing the controller can be powered from an external USB port via a USB type A to USB type A cable. 113/1060 · 106 Review state Translated
448 ../../controllers/linux/includes/platforms/j100/d1_cpu/power.rst:5
	Russian При прошивке контроллера отключите от него всю внешнюю нагрузку. Суммарный потребляемый ток при питании от порта USB не должен превышать 0.5А.
	English When flashing the controller, disconnect all external loads from the controller. The total current consumption when powered from the USB port should not exceed 0.5A. 171/1480 · 148 Review state Translated
449 ../../controllers/linux/includes/platforms/j100/d1_cpu/power.rst:8 • ../../controllers/linux/includes/platforms/j100/d1p_cpu/power.rst:9
	Russian Данный вариант питания предназначен только для режима прошивки, штатная работа контроллера при подаче питания через USB) порт невозможна и может привести к выходу контроллера из строя.
	English This power option is only for firmware mode, normal operation of the controller when powered through the USB) port is not possible and could cause the controller to malfunction. 187/1940 · 194 Review state Translated
450 ../../controllers/linux/includes/platforms/j100/d1_cpu/power.rst:11 • ../../controllers/linux/includes/platforms/j100/d1p_cpu/power.rst:12
	Russian При питании от USB будут недоступны порты RS485 на материнской плате.
	English When powered by USB, the RS485 ports on the motherboard will not be available. 82/730 · 73 Review state Translated
451 ../../controllers/linux/din_rail/d1.rst:192 • ../../controllers/linux/din_rail/d1p.rst:200 • ../../controllers/linux/din_rail/d1p_knx.rst:195
	Russian Энергопотребление
	English Energy consumption 18/170 · 17 Review state Translated

Shortcut	Action
`?`	Open available keyboard shortcuts.
`Alt` + `Home`	Navigate to the first translation in the current search.
`Alt` + `End`	Navigate to the last translation in the current search.
`Alt` + `PageUp` or `Ctrl` + `↑` or `Alt` + `↑` or `Cmd` + `↑` or	Navigate to the previous translation in the current search.
`Alt` + `PageDown` or `Ctrl` + `↓` or `Alt` + `↓` or `Cmd` + `↓` or	Navigate to the next translation in the current search.
`Ctrl` + `Enter` or `Cmd` + `Enter`	Submit current form; this works the same as pressing Save and continue while editing translation.
`Ctrl` + `Shift` + `Enter` or `Cmd` + `Shift` +`Enter`	Unmark translation as Needing edit and submit it.
`Alt` + `Enter` or `Option` + `Enter`	Submit the string as a suggestion; this works the same as pressing Suggest while editing translation.
`Ctrl` + `E` or `Cmd` + `E`	Focus on translation editor.
`Ctrl` + `U` or `Cmd` + `U`	Focus on comment editor.
`Ctrl` + `M` or `Cmd` + `M`	Shows Automatic suggestions tab.
`Ctrl` + `1` to `Ctrl` + `9` or `Cmd` + `1` to `Cmd` + `9`	Copies placeable of a given number from source string.
`Ctrl` + `M` followed by `1` to `9` or `Cmd` + `M` followed by `1` to `9`	Copy the machine translation of a given number to current translation.
`Ctrl` + `I` followed by `1` to `9` or `Cmd` + `I` followed by `1` to `9`	Ignore one item in the list of failing checks.
`Ctrl` + `J` or `Cmd` + `J`	Shows the Nearby strings tab.
`Ctrl` + `S` or `Cmd` + `S`	Focus on search field.
`Ctrl` + `O` or `Cmd` + `O`	Copy the source string.
`Ctrl` + `Y` or `Cmd` + `Y`	Toggle the Needs editing checkbox.
`→`	Browse the next translation string.
`←`	Browse the previous translation string.